印后加工技術虛擬實訓教程（中英文）

目錄（中文）
項目一　模切壓痕虛擬仿真實訓
任務一　熟悉模切壓痕虛擬仿真實訓系統環境／ 2
一、模切壓痕工藝／ 2
二、軟件啟動與熟悉環境／ 2
三、啟動模切壓痕虛擬仿真實訓模塊／ 4
四、學習模切壓痕虛擬仿真實訓模塊構成／ 5
任務二　學習模切壓痕設備的結構組成及工作原理／ 5
一、學習模切壓痕設備的結構組成／ 5
二、學習模切壓痕設備的工作原理／ 15
任務三　學習模切壓痕設備模壓版制作過程／ 15
一、模切壓痕版制作工藝流程／ 15
二、使用虛擬仿真系統學習模切版制作過程／ 19
任務四　學習模切壓痕設備結構模擬拆裝／ 24
任務五　學習模切壓痕故障排除模擬操作／ 27
一、有暗線和炸線產品故障排除模擬操作／ 27
二、模切太輕故障排除模擬操作／ 30
2
印后加工技術虛擬實訓教程
項目二　折頁虛擬仿真實訓
任務一　學習折頁設備的工作原理及主要結構／ 34
一、學習折頁設備種類及主要結構／ 34
二、使用虛擬仿真系統學習柵欄式折頁裝置／ 36
任務二　學習折頁設備結構模擬拆裝／ 39
任務三　學習折頁機故障排除模擬操作／ 43
一、紙堆不平整故障排除模擬操作／ 43
二、吸嘴上下運動不暢故障排除模擬操作／ 46
項目三　燙印虛擬仿真實訓
任務一　學習燙印設備的工作原理及工藝流程／ 50
一、學習燙印種類及工藝流程／ 50
二、學習燙印設備工作原理／ 56
任務二　學習燙印設備結構模擬拆裝／ 56
任務三　學習燙印機模擬操作／ 59
一、熟悉操作界面／ 59
二、溫度調節模擬操作／ 61
三、壓力調節模擬操作／ 63
四、燙印版調整／ 66
任務四　學習燙印機故障排除模擬操作／ 69
一、燙印不上質量弊病排除模擬操作／ 69
二、產品字跡發虛質量弊病排除模擬操作／ 75
項目四　覆膜虛擬仿真實訓
任務一　學習覆膜設備的工作原理及主要構成／ 79
一、學習覆膜種類及主要構成／ 79
二、學習覆膜設備工作原理／ 83
任務二　學習覆膜設備結構模擬拆裝／ 84
3
一、即涂覆膜機模擬拆裝／ 84
二、預涂覆膜機模擬拆裝／ 87
任務三　學習覆膜機模擬操作／ 90
一、熟悉操作界面／ 90
二、復合壓力調節模擬操作／ 92
三、復合溫度調節模擬操作／ 93
任務四　學習覆膜機故障排除模擬操作／ 95
一、覆膜工藝主要質量故障產生的原因和解決方法／ 95
二、涂覆不均質量故障排除模擬操作／ 96
三、皺膜、皺紙質量故障排除模擬操作／ 99
目錄（英文）
Project 1　Die-cutting virtual simulation training
Task 1: Familiarity to the operating environment of the die-cutting virtual simulation training
system ／ 2
1. Familiarity to the die-cutting process ／ 2
2. Launching software and the operating environment’s familiarity ／ 3
3. Starting the die-cutting virtual training module ／ 4
4. Learning the composition of the die-cutting virtual simulation training module ／ 5
Task 2: Learning the structural composition and working principles of die-cutting equipment ／ 7
1. Learning the structural composition of the die-cutting equipment ／ 7
2. Learning the working principles of die-cutting equipment ／ 18
Task 3: Learning the process of making the model-cutting pressing-marks equipment and the
stamped sheet ／ 19
1. The stamped sheet making process and steps of die-cutting ／ 19
2. Using the virtual simulation system and learning the process of making the stamped sheet ／ 25
Task 4: Learning the simulation disassembly of the die-cutting equipment ／ 29
Task 5: Learning the simulation operation of die-cutting Troubleshooting ／ 33
1. The troubleshooting simulation operation of “too deep or too many creasing rules”／ 33
2. The troubleshooting simulation operation of “Insufficient die-cutting pressure”／ 36
CONTENTS
2
Post-press Processing Technology Virtual Training Course
Project 2　Practical Training of Folding Simulation
Task 1: Learning the working principles and the main components of folding equipment ／ 40
1. The type and main components of folding equipment ／ 40
2. Learning the fence folding device with the virtual simulation system ／ 43
Task 2: Learning the simulation disassembly process of folding equipment ／ 46
Task 3: Learning the troubleshooting simulation operations of the folding machine ／ 50
1. The troubleshooting simulation operations of “uneven paper piles surface”／ 50
2. The troubleshooting simulation operations of up and down nozzle moves irregularly ／ 53
Project 3　Practical Training of Hot Stamping Simulation
Task 1: Learning the working principles and the technologocal process of hot stamping
equipment ／ 57
1. Learning the types and the technologocal processes ／ 57
2. Learning the work principles of hot stamping equipment ／ 65
Task 2: Learning the disassembly simulation of hot stamping equipment ／ 66
Task 3: Learning the simulation operations of hot stamping machine ／ 69
1. Familiarity to the operation interface ／ 69
2. The simulation operations of temperature adjustment ／ 70
3. Pressure regulation’s simulated operation ／ 73
4. The simulate operation of hot stamping plate adjustment ／ 76
Task 4: Learning the troubleshooting simulation operations of hot stamping machine ／ 79
1. The troubleshooting simulation operations of unstable hot stamping patterns. ／ 79
2. The troubleshooting simulation operations of illegible stamping pictures and texts ／ 85
Project 4　Laminating virtual simulation training
Task 1: Learning the working principles and main structure of the laminating equipment ／ 90
1. Learning the type and main structure of the laminating equipment ／ 90
2. Learning the working principles of laminating device ／ 95
3
Task 2: Learning the simulation disassembly of laminating equipment ／ 97
1. The simulation disassembly of instant coating laminating machine ／ 97
2. Pre-coated laminating machine disassembly simulation ／ 100
Task 3: Learning the simulate operation of laminating process ／ 103
1. Familiarity to the operation interface ／ 103
2. The simulate operations of composite pressure regulation ／ 105
3. The simulate operations of temperature adjustment ／ 107
Task 4: Learning the laminating troubleshooting simulate operation ／ 109
1. The causes of the coating technology’s main quality disadvantages and the solutions ／ 109
2. The simulate operations of uneven coating troubleshooting ／ 111
3. The troubleshooting simulate operations of wrinkled paper and film ／ 114